Eaton's Cooper Power series offers 15, 25, and 35 kV 200 A loadbreak elbow connectors and 600/900 A deadbreak connector systems. These connectors are ideal for submersible, fully-shielded, insulated plug-in terminations and are made with high-quality EPDM insulation.

   The 600/900 A connectors provide shielded, submersible connections for high-voltage equipment like transformers and switchgear, supporting splices, junctions, taps, and deadends for underground distribution feeders, ensuring flexibility and reliability.

Jiuying provides 15/25/35KV 200A Load Break Bushing Insert, Bushing well and 15-35KV 600/900A Apparatus bushings.

All these HV bushings comply with IEEE/ANSI standards, is fully interchangeable with other products have the same interface.

Jiuying Supply 2-Position & 4-Position Load Break Switch. These switches are designed for use in transformer oil, FRTM fluid, or an approved equivalent fluid-filled pad-mounted transformers or distribution switchgear.

These switches meet the full requirements of the latest revision of both IEEE and IEC standards.

Eaton Cooper introduced Bay-O-Net Fuse and Bay-O-Net Fuse Holder in the 1960s. The voltage levels are 23KV and 38KV, and they are designed for pad-mounted transformers.

Eaton Cooper's Bay-O-Net Fuse includes Current Sensing, Dual Sensing, Dual Element, High Amp Overload, etc. Bay-O-Net Fuse Holder has sidewall mount type and cover mounti type. The holder combines hotstick operation and it is safer to replace the Bay-O-Net Fuse.

The Elbow Arrester is designed to provide overvoltage system protection by combining a metal oxide varistor module within a rubber elbow, Meet the IEEE 386 standard, available in voltage ranges from 15 kV to 35 kV..

These Elbow Arresters are used in pad-mounted transformer and entry cabinets, and other insulations, ensuring shielded deadfront arrester protection.

Jiuying Provide Eaton Cooper ELSP Current Limiting Fuse, Voltage from 8.3KV to 38KV. It is designed for used in transformer oil and FR3 Fluid.

The ELSP Current Limiting fuse is series with low current primary protection devices such as a Bay-O-Net fuse and weak link fuse. It is used in transformers to protect and isolate faulted equipment.